---
title: Windows Web : Prod and Preprod
slug: contract360/k4pJ-windows-web-prod-and-preprod
createdAt: 2024-10-29T06:15:14.570Z
---

# Introduction

This document aims to provide comprehensive guidance for performing the **Fingerprint signing&#x20;**&#x77;ith the help of the **Startek FM220U L1&#x20;**&#x64;evice in the **Windows web browser&#x20;**&#x77;ith **CDSL&#x20;**&#x61;s the Esigning Service Provider (ESP) in both the **production and pre-production&#x20;**&#x65;nvironment.

## Contract Signing In Production Environment&#x20;

To use the **FM220U L1** device to perform the fingerprint signing it should have a valid subscription. You can verify the status of the subscription of the device by visiting:
[https://www.acpl.in.net/fm220\_entry/DEV\_SUB\_EXTN.aspx](https://www.acpl.in.net/fm220_entry/DEV_SUB_EXTN.aspx).
Enter the device serial number and it will provide the status of the subscription.

If any help is required please drop an email to [support@acpl.ind.in](mailto\:support@acpl.ind.in) for further assistance.

### Prerequisites Required:

Below are the prerequisites required to perform the Aadhaar-based fingerprint signing in the production environment with the help of the STARTEK FM220U L1 device.

1\.  Windows Support Tools For L1 Device&#x73;**:&#x20;**[Download the driver](https://acpl.in.net/downloads/SETUPS/L1-AST300/Setup_ACPL_L1_Support.zip)

2\. Windows Certified RD Service For L1 Device&#x73;**:&#x20;**[Download the driver.](https://acpl.in.net/downloads/SETUPS/L1-AST300/Setup_ACPL_L1_RDservice.zip)

3\. STARTEK Biometric Device L1 **(FM220U L1)**.

Once you have all the prerequisites, follow the steps below to set up the STARTEK FM220U L1 device to perform the signing.

### Steps to follow:

**Step 1:&#x20;**&#x56;isit [https://acpl.in.net/rdservice.html](https://acpl.in.net/rdservice.html) and download the “**Windows support Tools for L1 Device**” and “**Windows Certified RD Services for L1 Device**”.

![ACPL Webiste Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-vC1VSf5W30VAycIOGdKeI-20240811-162737.png)

**Step 2:&#x20;**&#x4C;ocate both the downloaded files. **Double-click** on the “**Setup\_ACPL\_L1\_Support” Zip file.**

![Windows folder Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-81tbB1m5WCJYleZzNTHt8-20240811-162912.png)

**Step 3:&#x20;**&#x53;etup\_ACPL\_L1\_Support Windows installer package will appear. **Double-click&#x20;**&#x6F;n the “**Setup\_ACPL\_L1\_Support**”. An administrator window will appear. Click on “**Yes**”.

![Windows folder Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-ciSvWgoZBT9PTzP7ojmnv-20240811-163041.png)

**Step 4:&#x20;**&#x41;n ACPL L1 Support tool setup wizard will appear click the “**Next**” button.

![Installation Window Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-dhyiwvvUKqA3heF1OeX1x-20240811-163143.png)

**Step 5:&#x20;**&#x53;elect “**Everyone**”. Leave the folder location as default. Click the “**Next**” button.

![Installation Window Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-KqwmU-Ei28WfWdOL01qQ3-20240811-163233.png)

**Step 6:&#x20;**&#x41; confirmation window will appear. Click the “**Next**” button.

![Installation Window Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-sNym99hcC6RbID5_LIW2l-20240811-163325.png)

**Step 7:&#x20;**&#x54;he ACPL L1 Support tools for RD Service **installation will start**. Please wait for a few seconds.

![Installation Window Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-vQ8zjSknZwsSD49DDMYKn-20240811-163432.png)

**Step 8:&#x20;**&#x4F;nce installation is complete. A confirmation popup window will appear. Click the “**Close**” button.

![Installation Window Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-YsnghOmavcgZgayBthXbr-20240811-163527.png)

**Step 9:&#x20;**&#x4C;ook for the Setup\_ACPL\_L1\_RDservice which is downloaded. **Double-click** on th&#x65;**&#x20;“Setup\_ACPL\_L1\_RDservice**”.

![Windows Folder Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-5vM_Ydy3HI2j5kwpUdrs_-20240811-163627.png)

**Step 10:&#x20;**&#x41; Setup\_ACPL\_L1\_RDservice Windows installer package will appear. **Double-click** on the “**Setup\_ACPL\_L1\_RDservice**”. An administrator window will appear. Click on the “**Yes**” button.

![Windows Folder Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-m0eHiylESfixB0c1iPeTU-20240811-163724.png)

**Step 11:&#x20;**&#x41;n ACPL L1 RD Servuce setup wizard window will appear. Click the “**Next**” button.

![Installation Windows Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-IaItl05rvkC6Z_pzBFJo5-20240811-163903.png)

**Step 12:&#x20;**&#x41; window will appear to choose the installation folder. Leave it as a default. Select “Everyone” and click the “**Next**” button.

![Installation Windows Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-pzJR-vmJJJKRWg-kdNb02-20240811-164012.png)

**Step 13:&#x20;**&#x41; confirmation window will appear. Click on the “**Next**” button.

![Installation Windows Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-pE7AoFLAp2AsjsTL-6H2D-20240811-164104.png)

**Step 14:&#x20;**&#x54;he ACPL L1 RD Service **installation will start**. Please wait for a few seconds.

![Installation Windows Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-x98LBjA6HIguajgx1SQto-20240811-164150.png)

**Step 15:&#x20;**&#x4F;nce installation is complete. A confirmation popup window will appear. Click the “**Close**” button.

![Installation Windows Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-MsUzO9hAn8Ni8IrZa5cbE-20240811-164231.png)

**Step 16: Click** on the search bar on the Windows taskbar. Search for the "**Services**" in the system.

![Windows Search Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-Ul2LEOj8Z4MbbkFIaz8oA-20240811-164309.png)

**Step 17:&#x20;**&#x53;earch for the ACPL L1 Registered Device. **Click&#x20;**&#x6F;n “**ACPL L1 Registered Device**”. A side window will appear. Click on the  “Restart” the service.

![Windows Service Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-f7oeMK3OutxT93G1iwloK-20240811-164351.png)

**Step 18:&#x20;**&#x54;he **ACPL L1 Registered Device will restart**. Please wait for a few seconds.

![Windows Service Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-1RL3YDYKR1bUJG-73BV1M-20240811-164443.png)

**Step 19:&#x20;**&#x4F;nce the process is completed. **Insert the FM220U L1** Biometric device into the system. A message will appear at the bottom right corner of the screen stating “**Device Inserted**”.

![Windows Service Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-sjLCdLbErTlOHmtsDUUU6-20240811-164702.png)

**Step 20:&#x20;**&#x4E;avigate to the **signing link** sent to the signer’s email (provided while initiating the contract).

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXd62WBQ7eQBHk0fm5exiNqk1kc2TafBwtKq0cT2ovPR6ayuuY4zP5mW0VMEAdIzLtmrmUornVkxkjHmTeFmZPr0u02QmPaK8HHo3y9vFqofXvOnJIhmg7XiBKMJUtvGDN-M8HtaIcZJAdyHG_5_179MKmE?key=RMS7mIdPO_86hILBTujSbA)

**Step 21:&#x20;**&#x54;he pre-verification page will open, where the user needs to perform verification using a one-time OTP. Click on the “**Get OTP**” button.

![OTP Verification Page](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-SYgydeXLvmC65q_PXfVGK-20240807-172002.png)

**Step 22:&#x20;**&#x54;he user will receive the OTP on the **email&#x20;**&#x70;rovided during contract initiation.

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXdPot_aClS47y9220Y71dc2rNMEx4J3XL7QOwmqFfKcnd9tCeAJTCYHQKhwJsXpD0_kWjjFRzKUk3ZqztHSMYCUeJd-3GtfE6t0EnMlwiKsrTmolpXwcburdNEzPCPyO79wQT4tz4mgM10Nfewdsm3_nt98?key=RMS7mIdPO_86hILBTujSbA)

**Step 23:&#x20;**&#x45;nter the OTP received via email and click on the “**Verify**” button.

![OTP Verification Page](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-TIUJiqUDVvpV-xt0i7wpx-20240807-172223.png)

**Step 24:&#x20;**&#x55;pon successful verification, the user will land on the contract page. Click on the “**I want to sign**” button to proceed.

![Contract Page](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-eVZyHd0gT5LF30cd0Y9D0-20240807-172320.png)

**Step 25: &#x20;**&#x54;he CDSL Interface will open, Please wait for a second. It will automatically discover the RD Service Installed on the device.

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXcBfpu7u057cgoZqkOsjKnQwMFjvdhugnIcGpXj1aqiGRySp1PR9BF8qO0qYZMTkZlIH0drZLfaFQOdGhk8gq6qgZ791c-elg8dQylt3Ma6Y3miEg-vTNxqIH89KQ2JTOlMHiVhOWMc4svv74zG8MfYJkDl?key=M5iMWs261HAKaEIdq9t20A)

**Step 26:&#x20;**&#x4F;nce device discovery is completed. The RD service will automatically detected.

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXeIwn8k6PclOGvDHvuz6WGPlbtduxLl1_JfF9tToe1RXQsrId2ttzSEji33VRObwMbKH8YzurQt-WJtkVz1LwSD9WbwBKrp6Tec3JSnlaa6tXJ0mYVsOVwX5857G99owBciUNRBZPcwR6LxpxFwW76BvIB8?key=M5iMWs261HAKaEIdq9t20A)

**Step 27:&#x20;**&#x46;ill in the Aadhaar Number. Tick the consent Box.

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXdYQEW8PhG11v_CXzVUyBTJKKU1FrlRYqggmQ7JE7Iado5hI6vmVEEGr66oc9On8YjOvtwILOCyAHZQUjVoBeMR9KDntYKzqJw4Qdw31y2ttx4DPiTIsm_OlF_pNptXHzKwBYOKo-CkXvIH1-fogoLYJyfj?key=M5iMWs261HAKaEIdq9t20A)

**Step 28:&#x20;**&#xA0;Click on the “Start Capture” button to perform the signing.

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXf5maAx3638A3APwAiYEGn4ESgRjU_fZFR5gDdLF-8EImousqCZsvqBnai-bkoGA5_Xv9XxNtN7hmDFDpbiBfKFkOMHK0sZ6kA2gcIypRGTBcoprVeyUKYOB0HKWfF907PE9r9Oi780dv6YwqNjihj7g372?key=M5iMWs261HAKaEIdq9t20A)

**Step 29:&#x20;**&#x41;n interface will appear on the screen. Place your finger firmly on the device. The fingerprint will be automatically captured.

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXcPXvm-_-J_8zqTZz5LJRqWhsnmzFnQsFbn_FYYYAmX91kAcCQq5c5s60k2i77HT7jItnFjL5UctvQ2yyCQ9WEFO9ykY7fO_8pSlhzC1KIpObvX3AYSDvXrNHvPR1e8whZPqUR3gV86M-I-JkJnYnSvr9OB?key=M5iMWs261HAKaEIdq9t20A)

**Step 30:&#x20;**&#x54;he user will be automatically redirected to the signed contract where they can see their signature affixed to it. Click on “Done” to complete the signing process.

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXdt1Fd548Q2OvbHSLmDjKG_s2bMEdzRo0WJSg75AumWfRwjeIg6ahJLPeAQlJ342ZnV5JZyabvnBpsCSOycFhMTdxpJ_q52P7kAS-k9wrcV2STKEG90uzElxFDun84ZCdrDHN78J1YdnPyPQxRtHlfCUlg3?key=M5iMWs261HAKaEIdq9t20A)

**Step 31:&#x20;**&#x54;he user will see the Success page and can click on the “**Great**” button or be redirected to the success URL set by the contract initiator after 5 seconds.

![Success Page](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-0RHDGCnTFe1A4iFtyC9St-20240807-173201.png)

**Step 32: &#x20;**&#x54;he user will receive a confirmation email with the header “**Confirmation of signing the document**,” containing the signed contract.

![Email Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-pG_87pMZyQYBYjCVZ3MyJ-20240807-173305.png)

**Step 33:&#x20;**&#x4F;nce all signers have signed the contract, the user will receive another email with the header “Your document signing has been finalized successfully,” containing th&#x65;**&#x20;final signed contract&#x20;**&#x61;nd th&#x65;**&#x20;Audit Trail Certificate**.

![Email Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-0W-IgsCkrfp321PfWTaJ8-20240807-173413.png)

## Contract Signing In Pre-Production Environment

To use the **FM220U L1** device to perform the fingerprint signing it should have a valid subscription. You can verify the status of the subscription of the device by visiting:
[https://www.acpl.in.net/fm220\_entry/DEV\_SUB\_EXTN.aspx](https://www.acpl.in.net/fm220_entry/DEV_SUB_EXTN.aspx).
Enter the device serial number and it will provide the status of the subscription.

If any help is required please drop an email to [support@acpl.ind.in](mailto\:support@acpl.ind.in) for further assistance.

### Prerequisites Required:

Below are the prerequisites required to perform the Aadhaar-based fingerprint signing in the pre-production environment with the help of the STARTEK FM220U L1 device.

1\.  Windows Support Tools For L1 Device&#x73;**:&#x20;**[Download the driver](https://acpl.in.net/downloads/SETUPS/L1-AST300/Setup_ACPL_L1_Support.zip)

2\. Windows Certified RD Service For L1 Device&#x73;**:&#x20;**[Download the driver.](https://acpl.in.net/downloads/SETUPS/L1-AST300/Setup_ACPL_L1_RDservice.zip)

3\. STARTEK Biometric Device L1 **(FM220U L1)**.

Once you have all the prerequisites, follow the steps below to set up the STARTEK FM220U L1 device to perform the signing.

### Video Tutorial:

To make the setup process for fingerprint signing easier, we have included a video tutorial in the documentation. This video offers a step-by-step guide on how to configure the fingerprint device to perform secure signings.

[https://drive.google.com/file/d/1iwqlhz8ybTMVpvycnhbRdAmqzt9Fpvi5/view?usp=sharing](https://drive.google.com/file/d/1iwqlhz8ybTMVpvycnhbRdAmqzt9Fpvi5/view?usp=sharing)

### Steps to follow:

**Step 1:&#x20;**&#x56;isit [https://acpl.in.net/rdservice.html](https://acpl.in.net/rdservice.html) and download the “**Windows support Tools for L1 Device**” and “**Windows Certified RD Services for L1 Device**”.

![ACPL Webiste Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-vC1VSf5W30VAycIOGdKeI-20240811-162737.png)

**Step 2:&#x20;**&#x4C;ocate both the downloaded files. **Double-click** on the “**Setup\_ACPL\_L1\_Support” Zip file.**

![Windows folder Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-81tbB1m5WCJYleZzNTHt8-20240811-162912.png)

**Step 3:&#x20;**&#x53;etup\_ACPL\_L1\_Support Windows installer package will appear. **Double-click&#x20;**&#x6F;n the “**Setup\_ACPL\_L1\_Support**”. An administrator window will appear. Click on “**Yes**”.

![Windows folder Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-ciSvWgoZBT9PTzP7ojmnv-20240811-163041.png)

**Step 4:&#x20;**&#x41;n ACPL L1 Support tool setup wizard will appear click the “**Next**” button.

![Installation Window Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-dhyiwvvUKqA3heF1OeX1x-20240811-163143.png)

**Step 5:&#x20;**&#x53;elect “**Everyone**”. Leave the folder location as default. Click the “**Next**” button.

![Installation Window Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-KqwmU-Ei28WfWdOL01qQ3-20240811-163233.png)

**Step 6:&#x20;**&#x41; confirmation window will appear. Click the “**Next**” button.

![Installation Window Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-sNym99hcC6RbID5_LIW2l-20240811-163325.png)

**Step 7:&#x20;**&#x54;he ACPL L1 Support tools for RD Service **installation will start**. Please wait for a few seconds.

![Installation Window Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-vQ8zjSknZwsSD49DDMYKn-20240811-163432.png)

**Step 8:&#x20;**&#x4F;nce installation is complete. A confirmation popup window will appear. Click the “**Close**” button.

![Installation Window Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-YsnghOmavcgZgayBthXbr-20240811-163527.png)

**Step 9:&#x20;**&#x4C;ook for the Setup\_ACPL\_L1\_RDservice which is downloaded. **Double-click** on th&#x65;**&#x20;“Setup\_ACPL\_L1\_RDservice**”.

![Windows Folder Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-5vM_Ydy3HI2j5kwpUdrs_-20240811-163627.png)

**Step 10:&#x20;**&#x41; Setup\_ACPL\_L1\_RDservice Windows installer package will appear. **Double-click** on the “**Setup\_ACPL\_L1\_RDservice**”. An administrator window will appear. Click on the “**Yes**” button.

![Windows Folder Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-m0eHiylESfixB0c1iPeTU-20240811-163724.png)

**Step 11:&#x20;**&#x41;n ACPL L1 RD Servuce setup wizard window will appear. Click the “**Next**” button.

![Installation Windows Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-IaItl05rvkC6Z_pzBFJo5-20240811-163903.png)

**Step 12:&#x20;**&#x41; window will appear to choose the installation folder. Leave it as a default. Select “Everyone” and click the “**Next**” button.

![Installation Windows Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-pzJR-vmJJJKRWg-kdNb02-20240811-164012.png)

**Step 13:&#x20;**&#x41; confirmation window will appear. Click on the “**Next**” button.

![Installation Windows Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-pE7AoFLAp2AsjsTL-6H2D-20240811-164104.png)

**Step 14:&#x20;**&#x54;he ACPL L1 RD Service **installation will start**. Please wait for a few seconds.

![Installation Windows Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-x98LBjA6HIguajgx1SQto-20240811-164150.png)

**Step 15:&#x20;**&#x4F;nce installation is complete. A confirmation popup window will appear. Click the “**Close**” button.

![Installation Windows Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-MsUzO9hAn8Ni8IrZa5cbE-20240811-164231.png)

**Step 16: Click** on the search bar on the Windows taskbar. Search for the "**Services**" in the system.

![Windows Search Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-Ul2LEOj8Z4MbbkFIaz8oA-20240811-164309.png)

**Step 17:&#x20;**&#x53;earch for the ACPL L1 Registered Device. **Click&#x20;**&#x6F;n “**ACPL L1 Registered Device**”. A side window will appear. Click on the  “Restart” the service.

![Windows Service Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-f7oeMK3OutxT93G1iwloK-20240811-164351.png)

**Step 18:&#x20;**&#x54;he **ACPL L1 Registered Device will restart**. Please wait for a few seconds.

![Windows Service Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-1RL3YDYKR1bUJG-73BV1M-20240811-164443.png)

**Step 19:&#x20;**&#x4F;nce the process is completed. **Insert the FM220U L1** Biometric device into the system. A message will appear at the bottom right corner of the screen stating “**Device Inserted**”.

![Windows Service Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-sjLCdLbErTlOHmtsDUUU6-20240811-164702.png)

**Step 20:&#x20;**&#x4E;avigate to the **signing link** sent to the signer’s email (provided while initiating the contract).

![Email Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-8-gzz5rNjQRs5sTfzLctl-20240807-171844.png)

**Step 21:&#x20;**&#x54;he pre-verification page will open, where the user needs to perform verification using a one-time OTP. Click on the “**Get OTP**” button.

![OTP Verification Page](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-SYgydeXLvmC65q_PXfVGK-20240807-172002.png)

**Step 22:&#x20;**&#x54;he user will receive the OTP on the **email&#x20;**&#x70;rovided during contract initiation.

![Email OTP Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-FTl6tk6hOzw6pZMVFxx1Y-20240807-172121.png)

**Step 23:&#x20;**&#x45;nter the OTP received via email and click on the “**Verify**” button.

![OTP Verification Page](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-TIUJiqUDVvpV-xt0i7wpx-20240807-172223.png)

**Step 24:&#x20;**&#x55;pon successful verification, the user will land on the contract page. Click on the “**I want to sign**” button to proceed.

![Contract Page](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-eVZyHd0gT5LF30cd0Y9D0-20240807-172320.png)

**Step 25: &#x20;**&#x54;he CDSL Interface will open, Please wait for a second. It will automatically discover the RD Service Installed on the device.

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXcfkmnWYNMSLPkHZnjO-9j-YyFSLk72nrX3CBodODz1P0dXiYTCAazeMnsEqZPQwluenXaA9ZBlI-DUfjNaj8QJbxi46ms_3Vg0nU70UcoJllRwOqzqjE6O6vvgJt1X7EqvWDbo2DIptjtNgSTWW2B6vX10?key=OWEC43Q_1zI7lkOdq7nsrQ)

**Step 26:&#x20;**&#x4F;nce device discovery is completed. The RD service will automatically detected.

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXesTQ2bEaAu9rpZ3mAe9PGAvp-zsKOD3qS5-ZNUAelKWPs6aap9BUsjVt4Go-BFlKZBu9Zr-OFEI27mBjZPdgpnHL8RyYr91qYHrrFf20db_3fePnR67sw5_kpfKLJFvVSsyCeTjjHr4jYhMpsAmwRYvlOT?key=OWEC43Q_1zI7lkOdq7nsrQ)

**Step 27:&#x20;**&#x46;ill in the Aadhaar Number. Tick the consent Box.

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXdpXbsah4yfRrfm40_Uxlb-J6wwy9b7Uz8lbQnKwYN1Y6ytT0ZIYm4lAsjy0OCeGk-iwkf4WSTXJ9Y8KZ7I6_3FWA1f5lBbaB6Jz37WgQuIwj7_DiT_5rbkNqpxjkQfM0p_So6IqtIOQgkQ5OH0Efdz8gsq?key=OWEC43Q_1zI7lkOdq7nsrQ)

**Step 28:&#x20;**&#xA0;Click on the “Start Capture” button to perform the signing.

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXcmDVQKgTmvHbFaj5z9Rs4WSyADCWcCNHTRXlXj5-1_IETAXDT3o6a0xhtcMtQbllH8LVy5ZbfcVATk9dLIKMYYFmNDgphITD9RKePAzyOmwgnDgSXyISgaaqPvqHYc5Xz3rjvFN_EeZol1qMewCzY_lGU?key=OWEC43Q_1zI7lkOdq7nsrQ)

**Step 29:&#x20;**&#x41;n interface will appear on the screen. Place your finger firmly on the device. The fingerprint will be automatically captured.

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXcfr5XW4H2zSfcadKkPTitGqNNlTIywZgsWx6oAO5RedSoYEwDc76vxXHuI8Z0riBAoJo2d2lVkA0L2S508-JUiXvD3_37LOGrKXCXC5i4ZGSlKQSeNVrIa_qx1U1nbpmcXqYt4Ze8A-G1HSOPpux4pSBjO?key=OWEC43Q_1zI7lkOdq7nsrQ)

**Step 30:&#x20;**&#x54;he user will be automatically redirected to the signed contract where they can see their signature affixed to it. Click on “Done” to complete the signing process.

![](https://lh7-rt.googleusercontent.com/docsz/AD_4nXciVprsxJfNWtQxmqrFOo_PwNC94sbCi43vYSlj3A-yZTYTJ2NRslALz-z-wEBUxwx4RrhR7mkPWnEt7rwOELwHSoDBGjDpSjSLONJxyLAUO2N4diRj4VtsxT8ROnD0eKU6CAX-pTvzNRPqi1Ct9YtxTS8E?key=OWEC43Q_1zI7lkOdq7nsrQ)

**Step 31:&#x20;**&#x54;he user will see the Success page and can click on the “**Great**” button or be redirected to the success URL set by the contract initiator after 5 seconds.

![Success Page](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-0RHDGCnTFe1A4iFtyC9St-20240807-173201.png)

**Step 32: &#x20;**&#x54;he user will receive a confirmation email with the header “**Confirmation of signing the document**,” containing the signed contract.

![Email Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-pG_87pMZyQYBYjCVZ3MyJ-20240807-173305.png)

**Step 33:&#x20;**&#x4F;nce all signers have signed the contract, the user will receive another email with the header “Your document signing has been finalized successfully,” containing th&#x65;**&#x20;final signed contract&#x20;**&#x61;nd th&#x65;**&#x20;Audit Trail Certificate**.

![Email Interface](https://api.archbee.com/api/optimize/qSNGjc2nDdmTfGm_rfzKG-0W-IgsCkrfp321PfWTaJ8-20240807-173413.png)

